Decorative Front Strip

Tools Required: 2.5 mm hex wrench

Removal of Decorative Front Strip

• Make sure the miniPRO is powered off and the charger is not connected
• Remove the Battery

WARNING!

Press the Power Button until all lights are off to discharge any power remaining in the miniPRO.

• Remove the Steering Bar.
• Place the unit upside-down.
• Remove the plastic wire protector.

• Unplug the Headlight wire harness.
• Using a 5 mm hex wrench, remove the four fasteners.

• Remove the Front Strip

Installation of Decorative Front Strip

• Install in the reverse order of removal.

You can purchase replacement decorative front strip here.